Maps & Terrain on WOTC site

Moderator: FieldMarshall Ober

User avatar
Posts: 518
Joined: Thu Feb 02, 2012 1:10 am
Location: At the Eastern edge of the Monacan Nation

Maps & Terrain on WOTC site

Unread post by Centurion » Thu Jul 18, 2013 2:26 am

Are the maps on the Wizard of the Coast site 3" or 2". If they are 2" how do I get them to print in 3" form. Also the overlay tiles to add in trenches and the like, are they 3" or 2", and what do I do with them if they 2".

Thanks in advance.

A piece of spaghetti or a military unit can only be led from the front end. George S. Patton

Nissan lover and Ace of Base fan
A.K.A.: Centurion24

Posts: 69
Joined: Sat Jan 12, 2013 9:26 am
Location: Denmark

Re: Maps & Terrain on WOTC site

Unread post by Falcon59 » Thu Jul 18, 2013 10:31 am

I'm pretty sure that the maps are 2"...
Your can print them @ 141% and that will be about 3", but I'm pretty sure they wouldn't fit with the newer 3" maps, since they have different hex numbers.

But the terrain tiles should be just fine.
The guide says to print them @ 150%, but normally A4 -> A3 would be 141%, so you may have the experiment a little :-)

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest